Product Description
COUNTER METER WITH WATER RESISTANT TACHOMETER RESET:
- passes for all motorcycles, ATVs and snowmobiles,
- has the ability to set the frequency of pulses received, sensitivity to incoming pulses and refresh rate of the display,
- when the engine does not work, displays the current hour,
- when the engine is running, displays the current engine speed,
- when the engine is switched off, the axles will be displayed the engine's maximum revs that were previously set, which will be reset the next time the engine is started. ASSEMBLY:
The meter should be mounted in a convenient place so that it will not be damaged in the event of a fall. After installing the meter, wrap the black cable around the high voltage wire 3-5 times making sure If the motorbike does not have a high-voltage cable and the coil is mounted immediately on the spark plug, wrap the wire around the coil. If the cord is wrapped tightly and is not exposed to damage or high temperatures. the meter still does not receive impulses, one has to try to find a place on the coil in which the wrapped cable will start receiving the signal, the other end should be inserted into the prepared hole in the counter.
SETTINGS:
Press the button on the back to change the settings:
1. The selection of the pulse frequency for one motor revolution will appear first (1.0 = one pulse per one rotation of the motor, 2.0 = two pulses per revolution or 0.5 = one pulse for two revolutions.) Most 2-stroke cross-country motorcycles require setting 1.0.
2. Then you can set the meter's sensitivity to the received pulses (Hi = high , Lo = low).
3. Then you can set the refresh rate of the display: T1 means refresh every 1 second, T0.5 means refresh every 0.5 seconds.
If you want to set a particular mode, stay on it for about 4 seconds and the selection will be automatically saved.